raltron electronics corporation 10651 nw 19th st. miami, florida 33172 u.s.a. tel: 305-593-6033 fax: 305-594-3973 e-mail: sales@raltron.com internet: http://www.raltron.com through hole clock oscillat ors-hcmos comp atible series co6 and co12 part numbering system example: co6100-10.000-ext-t, co12050-32.000-ext-t-tr environmental temperature cycle mil-std 883, method 1010, 10 cycles -20 c to 85 c shock mil-std-202, method 213, test condition c vibration mil-std-202, method 204, test condition a resistance to soldering heat mil-std-202, method 210, test condition b humidity 85% relative humidity at 85 c 250 hours mechanical gross leak test mil-std-883, method 1014, test condition c fine leak test mil-std-883, method 1014, test condition a terminal strength mil-std-202, method 211, test condition a and c marking ink epoxy, heat cured. moisture resistance mil-std 202, method 106, omit step 7b solderability mil-std-202, method 208, 95% coverage solvent resistance mil-std-202, method 2002, method 215 tf tr vcc "1" level 1/2 vcc "0" level 0 vdc t t +4.5 vdc +2.5 vdc +0.5 vdc series co6 co12 package 14 pin dip 8 pin dip frequency range 500.00 khz to 125.00 mhz 500.00 khz to 125.00 mhz frequency stability? co6100 : 100 ppm co12100 : 100 ppm co6050 : 50 ppm co12050 : 50 ppm co6025 : 25 ppm co12025 : 25 ppm operating temperature range 0 c to +70 c standard -40 c to 85 c extended 0 c to +70 c standard -40 c to 85 c extended storage temperature range -55 c to +125 c -55 c to +125 c input voltage?? +5 vdc 0.5 vdc +5 vdc 0.5 vdc current (max) 500 khz to 19.999 mhz: 20 ma 500 khz to 19.999 mhz: 20 ma 20 mhz to 34.999 mhz: 30 ma 20 mhz to 34.999 mhz: 30 ma 35 mhz to 69.999 mhz: 40 ma 35 mhz to 69.999 mhz: 40 ma 70 mhz to 125 mhz: 60 ma 70 mhz to 125 mhz: 60 ma output symmetry 40 to 60% normal 45 to 55% tight 40 to 60% normal 45 to 55% tight rise and fall time (0.5 - 4.5 vdc) under 24 mhz : 10 ns max under 24 mhz : 10 ns max 24 mhz to 70 mhz : 6 ns max 24 mhz to 70 mhz : 6 ns max 70 mhz to 125 mhz : 3 ns max 70 mhz to 125 mhz : 3 ns max logic "0" level +0.5 v max. (10% vdd) +0.5 v max. (10% vdd) logic "1" level +4.5 v min (90% vdd) +4.5 v min (90% vdd) load??? 15 pf or 10 ls ttl standard 15 pf or 10 ls ttl standard output waveforms environmental and technical conditions specifications ? frequency st ability inclusive of room tolerance , frequency st ability over tempera ture, 10% power supply v aria tion, aging, shock, and vibration ?? +3.3 volt version is available. consult raltron for specifications ??? output loads also available at 15 pf, 30 pf and 50 pf. consul t raltron for specifica tions features standard 8 and 14 pin dip package tolerance and stability to 25 ppm excellent clock for 16 and 32 bit processors low cost available in 3.3 volt f requency extended tempera ture series co6 co12 ( 14 pin dip) ( 8 pin dip) - 1 00 ppm 50 ppm 25 ppm 10 0 05 0 02 5 f requency s t a b il ity - in mhz tr gw 3. 3 ta pe a nd r eel * gull wing +3 .3 v options - ext - t s ymmetry tig ht sy mmetry * available for gull wing only
raltron electronics corporation 10651 nw 19th st. miami, florida 33172 u.s.a. tel: 305-593-6033 fax: 305-594-3973 e-mail: sales@raltron.com internet: http://www.raltron.com through hole clock oscillators - hcmos comp atible series co6 and co12 packaging 14 pin dip: 25 pieces per electrostatic tube 8 pin dip: 40 pieces per electrostatic tube pin 1 pin 14 20.80 max . 8 1 9 m a x .480 12.19 pin 8 pin 7 colored dot indicates pin 1 location marking area . 2 0 0 m a x 5 . 0 8 m a x . 2 5 0 m i n 6 . 3 5 m i n 1 3 . 2 0 m a x .018 .003 dia 0.46 .08 dia .600 .005 15.24 .13 . 1 8 0 4 . 5 7 . 5 1 9 m a x 7 . 6 2 . 1 3 . 3 0 0 . 0 0 5 . 0 3 1 . 0 0 3 0 . 7 9 . 0 8 test circuit pin function 1 n/c 4 ground 5 output 8 vcc pin function 1 n/c 7 ground 8 output 14 vcc co12 package (half size 8 pin dip) co6 package (full size 14 pin dip) v a vdd n/c gnd out cl 8 14 17 oscilloscope + - (8) (5) (4) power supply clock oscillator frequency counter frequency standard . 0 1 f dimensions scale n one di mensi on in mm inch scal e non e d ime nsio n i n mm inch pin connection pin connection note: pin 7 is internal to header note: pin 4 is internal to header pin 1 location pi n 1 pin 8 pin 5 pi n 4 ma r k in g area .200 max 5.08 max 6 . 3 5 m i n .018 .003 dia 0.45 .076 dia .300 .005 7 .62 .1 3 . 5 2 0 m a x 1 3 . 2 1 m a x . 2 5 0 m i n 7 . 6 2 . 1 3 . 3 0 0 . 0 0 5 13.21 max .520 max . 0 3 1 . 0 0 3 . 7 8 7 . 0 7 6
|